Company Information
We are qingdao dolco building material company based in jiaozhou , China. We are member of Tradekey.com since August, 2009. Our business is related to Construction & Real Estate industry and we specifically deal in One-component polyurethane foam filler. Please find our product details below:
one-component polyurethane foam sealant
dolco”polyurethane foam is used for sealing’ fixing and adhereing the gap bubble sealant for windows and doors, wooden planks around the walls of the sealing, insulation, water pipes, vents, wires exports sealing, insulation, moisture-proof ***** The product also has a feature in fixed, installation, noise, dust, gas separation, to fill vacancies in the structure, engineering hole etc.
polyurethane foam sealant
one-component polyurethane foam is a kind of one-component polyurethane foams, which is solidified by the moisture in the air. It is adopted by European advanced technology, plus carefully-chosen raw material and unique producing method, all of which make our PU foam to be stable, strong, hermetic and high-quality.
[ Specifications of manufacturing ]
Model :DF202
Density : 15 ~ 30ãŽ/m3
Weight : 750G, 900G
Working Temperature: +5℃ ∼ +30℃ (optimal +20℃)
Compressive Strength : 10 ∼ 20N/ãŽ
Thermal Conductivity (AVE TEMP 20 ± 5℃) : 0.020 ∼ 0.040W/m.k
Water Absorption : 1.0 ∼ 2.0g/100ãŽ
Tack Free Time (AVE TEMP 20℃, RH60%) : 10 ∼ 15min
Cutting Time(AVE TEMP 20℃, RH60%) : 40 ∼ 60min
Full Cure Time(AVE TEMP 20℃, RH60%) : 24hour
Yield : Max40â„“
Storage(AVE TEMP 20℃) : 9MONTH
Tank capacity: 750ml
Can Size : Ø66mm x L330mm
1Box : 15can / About kg
1Box Size : (W)208 x (H)338 x (L) 341mm
Sell DF202 one-component PU-foam
1.Wear protective gloves, goggles, and clothes.
***** surface dust, oil and contaminants before ***** on the working area.
3.Please use between +5℃and +40℃(the properest temperature is between +18℃and +25℃), and shake for 2minutes before using.
4.Spin on the spray nozzle and invert tank, and then put the spray nozzle into the bottom.slowly squeezed the handle and until causing ***** spray gun flow trigger control the size of the foam.
5. Fill vertical gaps from bottom up(pls pay attention to foam expansion).After solidify, be caution of heat resistant scope between -30℃and+80℃.
6. Clean the redundant foam on the spray nozzle and valves after using.
7. Surface will be dried within 20 minutes, and will finish within 24 hours.(According to the working environment, temperature and humidity vary)
8. The formation can be used for cutting, painting, sandblasing, shaping and ***** product is not anti-ultraviolet, sugguest to coat the foam surface
Sell one-component polyurethane foam sealant PU-foam
Model :DF202
Density : 15 ~ 30ãŽ/m3
Weight : 750G, 900G
Working Temperature: +5℃ ∼ +30℃ (optimal +20℃)
Compressive Strength : 10 ∼ 20N/ãŽ
Thermal Conductivity (AVE TEMP 20 ± 5℃) : 0.020 ∼ 0.040W/m.k
Water Absorption : 1.0 ∼ 2.0g/100ãŽ
Tack Free Time (AVE TEMP 20℃, RH60%) : 10 ∼ 15min
Cutting Time(AVE TEMP 20℃, RH60%) : 40 ∼ 60min
Full Cure Time(AVE TEMP 20℃, RH60%) : 24hour
Yield : Max40â„“
Storage(AVE TEMP 20℃) : 9MONTH
Tank capacity: 750ml
Can Size : Ø66mm x L330mm
1Box : 15can / About kg
1Box Size : (W)208 x (H)338 x (L) 341mm
Special Spec : Order Made
In order to enhance the quality of products, the above specifications may change
Thank you for taking the time to go through our business profile. If there are any question, inquiry or comments, please feel free to contact us.